|Standard Diameter Nozzle:||1.4mm|
|Rated Air Pressure:||3.0Bar/45Psi|
|Max.Pattern Width of Fan Shaped:||240mm|
|Capacity of Paint Container:||1000ml|
|Type of Feed:||Suction|
Type of Feed: Suction
Standard Nozzle: Φ1.4mm
Optional Nozzle: Φ1.4/1.7/1.8/2.0mm
Operating Pressure: 3.5-5.0bar
Peattern width: 200-250mm
Air Consumption: 7.0-12.0cfm
Paint Capacity: 1000 ml
Mainly used for medium adhesive painting of middle or low adhesive surfaces.
ST-4001A Exploded Drawing :
Air Cap Set
Air Hose Joint
Needle Valve Spring
Air Adjusting Valve Set
Spread Adj. Valve Set
Needle Valve Guide
Fluid Adjusting Screw
Lid Assy. Set
Air Valve Set
Material Tube Assembly
Air Orienting Ring
Cup Top Assemby
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed
reduce the risk of personal injury and damage to equipment.Read all
instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools
in damp or wet locations. Don’t expose to rain. Keep work area well
lit. Do not use air tools in the presence of flammable gases or
3. Keep children away. Children must never be allowed in the work
area. Do not let them handle machines, tools, extension cords, or
4. Store idle equipment. When not in use, tools must be stored in a
dry location to inhibit rust. Always lock up tools and keep out of
reach of children.
5. Use the right tool for the job. Do not attempt to force a small
tool or attachment to do the work of a larger industrial tool.
There are certain applications forwhich this tool was designed. It
will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.